Changing your exhaust can be a great way to improve the performance and sound of your vehicle. It is a relatively simple process that can be completed with a few basic tools and a bit of knowledge. This article will provide a step-by-step guide on how to change your exhaust.
Step 1: Locate the Exhaust
The first step in changing your exhaust is to locate the exhaust system on your vehicle. On most cars, the exhaust system runs from the engine, through the muffler, and out to the tailpipe. The exhaust system is typically located under the car, so you will need to raise the car or lie on your back to see it.
Step 2: Gather Tools and Materials
To change your exhaust, you will need a few basic tools and materials. These include:
- A socket wrench and socket set
- A jack and jack stands (or a lift)
- Exhaust pipe cutter or Sawzall
- Replacement exhaust
- Exhaust hangers and clamps
- High-Temperature Silicone
Step 3: Jack up the Vehicle
To change your exhaust, you will need to raise the car so that you can access the exhaust system. This can be done with a jack and jack stands, or you can use a lift if you have access to one. Make sure that the car is securely supported before you begin working on it.
Step 4: Remove the Old Exhaust
Once the car is raised, you can start to remove the old exhaust system. Begin by removing the exhaust hangers and clamps that hold the exhaust system in place. Then, use the socket wrench and socket set to remove the bolts that hold the exhaust system to the muffler and the tailpipe. Once all the bolts are removed, you can pull the old exhaust system out from under the car.
Step 5: Cut the Old Exhaust
Using an exhaust pipe cutter or Sawzall, cut the old exhaust pipe and remove the muffler and tailpipe.
Step 6: Install the New Exhaust
Now that the old exhaust system is removed, you can install the new exhaust. Begin by lining up the new exhaust system with the old one, making sure that the new exhaust pipe is in the same position as the old one. Once the new exhaust is lined up, clamp it in place using the new exhaust hangers and clamps.
Step 7: Connect the New Exhaust
Use the socket wrench and socket set to bolt the new exhaust system to the muffler and the tailpipe. Make sure that all the bolts are tightened securely.
Step 8: Seal the Connections
Using high-temperature silicone seal the connections between the muffler and the tailpipe, and the exhaust pipe and the muffler.
Step 9: Lower the vehicle
Lower the vehicle and test drive the car to ensure that the exhaust system is working properly and that there are no leaks.
Changing your exhaust can be a great way to improve the performance and sound of your vehicle. It is important to make sure that the new exhaust system is the right fit for your car and that it is installed correctly. With the right tools and a bit of knowledge, anyone can change their exhaust.
It is important to remember that it is always best to consult with a professional mechanic before attempting to change your exhaust, as this process can be dangerous if not done correctly.